Radiation Shielding Drywall - Shetrock - Gypsum BoardLead Lined Sheetrock / Drywall / Gypsum

For Radiation Shielding

Mayco's Lead Lined Drywall, sheetrock, gypsum board MAYCO lead-backed gypsum wallboard is furnished as 1/2" and 5/8" type “X” fire code gypsum board meeting classification ASTM C 36, with pure lead sheet, meeting federal specification QQ-L-201 F, GRADE C, factory laminated to the back side of the gypsum panel. The lead extends 1” beyond one vertical edge of the lead lined gypsum board to allow for overlapping of joints thus alleviating the need for separate lead joint strips. Lead Strips are required at the corners. Lead Shielding accessories for installation include lead discs for screw penetrations and sheet lead for backing and shielding of cut-outs for electrical, plumbing, medical gas or other penetrations as well as corners.

Lead Lined Sheetrock
Available in 48 Inch and 49 inch Widths

Mayco lead lined sheetrock, also known as leaded drywall and gypsum board is constructed of a single extruded sheet of our own lead sheet, laminated to the drywall. Mayco supplies sheet lead to QQ-L-201 F in various thicknesses, depending on the levels of radiation your construction calls for. Most of our lead lined drywall is shipped as 5/8 inch think, although 1/2 inch sheetrock is available.

Sheetrock sizes:

  • 4 ft X 8 ft
  • 4 ft X 9 ft
  • 4 ft x 10 ft
  • 4 ft x 12 ft

Lead Sheet Thickness

  • 1/32 in
  • 3/64 in
  • 1/16 in
  • 5/64 in
  • 3/32 in
  • 1/8 in

 

Installation As shown above, the lead lined drywall should be attached to support studs every 12 inches horizontally and 8 inches vertically. When using 48 inch drywall 2 inch lead strips should be used on each of the support wall studs. This should be attached, glued, prior to installing wall board and provides suitable overlap where drywall sections meet.

All openings ( plugs, etc.) should be double lined with lead sheet. Drywall screws should be covered with lead discs (provided by Mayco).

 

Download Spec Sheet (48 inch lead sheet) Download PDF          Download Spec Sheet (49 inch lead sheet) Download PDF

 

Contact Information

E-mail

Telephone General Information: sales@maycoindustries.com

800-749-6061 / 205-942-4242

A Metalico Company
FAX

205-945-8704

Postal address 

18 West Oxmoor Road
Birmingham, AL 35209

Valid XHTML 1.0 Transitional

 

[ Home ] [ Sheet Lead] [ Plumbing ] [ Roofing ] [ Stained Glass ] [ Radiation Shielding ] [ Lead Brick]

Home  I  Product Index
Telephone 800-749-6061 / 205-942-4242
sales@maycoindustries.com

Click here to make a request via our contact form

Mayco Industries, Inc., Lead Products and Fabrications, Commercial, Industrial